Navigation
Home Services About Contact Troubleshooting
Our Services
Installation Repair Maintenance
Login Get Started

AC Not Cooling Properly

Air conditioner runs but does not cool room effectively

Fix Steps:
1
Check and clean air filters - clogged filters reduce efficiency
2
Verify mode is set to COOL (not FAN or DRY)
3
Set temperature lower than current room temperature
4
Ensure outdoor unit fan is spinning and not blocked
5
Check for ice buildup on indoor coil - indicates refrigerant issue
6
Verify all doors and windows are closed
7
Clean outdoor unit fins from dust and debris
8
Check if room size matches AC capacity (BTU rating)
9
Ensure adequate clearance around outdoor unit
10
Wait 3 minutes after restart for compressor to engage
Preventive Tip

Clean filters bi-weekly during heavy use. Keep outdoor unit free from obstructions. Schedule annual maintenance.

References & Further Reading
These resources provide additional technical information and official documentation.
Related FAQs

Clean every 2 weeks during heavy use (summer), and monthly during light use. A dirty filter is the most common cause of poor cooling and can increase electricity consumption by up to 15%.
Was this helpful?

Set between 24-26°C (75-78°F) for optimal comfort and efficiency. Setting it too low (18-20°C) won't cool faster and wastes electricity. Each degree lower can increase energy use by 6-8%.
Was this helpful?

This is a built-in compressor protection feature. The 3-minute delay prevents damage to the compressor from rapid cycling. Never bypass this - it protects your expensive compressor.
Was this helpful?

Yes, but carefully. Turn off power first, then gently spray water from inside-out through the fins. Don't use high pressure as it can bend the fins. For heavy dirt or if fins are bent, call a professional.
Was this helpful?

ADSEE

Garcia St, Sorsogon City, 4700 Sorsogon

0920 923 6040

contact@soreta.com